Study of Two-stage Dipping Adhesion of Ply Cord

P. C. Yang; Y. J. Huang; W. H. Hsing

Home / Archives / Vol. 23 No. 1 (2016) / Original Research Articles

Original Research Articles · 研究論文

Study of Two-stage Dipping Adhesion of Ply Cord

二段式浸漬合股索粘結力之研究

P. C. Yang 楊博丞 Department of Textile Engineering, Chinese Culture University, San Wu Textile Company
Y. J. Huang 黃元駿 Department of Textile Engineering, Chinese Culture University, San Wu Textile Company
W. H. Hsing 邢文灝 ✉ Department of Textile Engineering, Chinese Culture University, San Wu Textile Company

Abstract

The 3×3 high strength polyester ply cord modified surface by the isocyanate compound, let RFL and that modified surface with great bonding properties. According to temperature of the third and sixth channel in line of factory temperature set of 225 and 230℃, and lowering the temperature, respectively, experiment A lowering third and sixth channel in line to 160 and 205℃, experiment B lowering third and keep sixth channel in line to 160 and 230℃, and with solid ingredient of 22.00, 22.25, 22.50% and load to 1.0 and 1.5 Kg, observed changes of physical properties of the ply cord. Research that, lowering the temperature can promote the physical properties, but the RFL agents coated fiber without complete. Change the solid ingredient can improve RFL agents coated situation, so you can use to increase quantity contained of VP-Latex to improve that reduce temperature to cause RFL agents coated not complete by the phenomenon. It can reduce energy cost and improve physical properties of ply cord.

Keywords

摘要

將3×3高強力聚酯合股索經異氰酸化合物改質表面，使其與RFL藥劑具有良好的鍵結性質，並以工廠線上溫度第三及第六道溫度為225℃及230℃為依據，使其降低溫度，分別為160℃及205℃、160℃、230℃，並配合固成份22%、22.25%、22.5%及施加荷重1.0kg及1.5kg，觀察合股索物性變化。研究得知，將溫度下降，能夠提升其物性，但使RFL藥劑包覆纖維情況不完整，而改變固成份含量，能夠提升RFL藥劑包覆纖維之情況，因此可以利用提升固成份含量，將降低溫度造成包覆未完全之現象，予以改善，達到降低能源成本，並提升物理性質之條件。

關鍵字

Also in this issue

Full TOC →

Analysis of the effect of electromagnetic wave absorption of Plain weave fabric composite
Ya-Wun Chen, Kuei-Chi Lee, Cu Hung Lee, Tong-Ze Pan
A Study of the Weaving conditions for Conductive Fabric by using Taguchi Approach and Neural Network Algorithm
Chien-Teng Hsieh
Polyester fabric dyeing process parameters applied to the regulation of OPTILAB
Shu-Hui Lin, Chi-Wei Lin, Ching-Ling Chuang, Wei-Sheng Chuang
The investigation on the different colors performance of re-dyeing between Natural Indigo and Sapan Wood Dyeing
C. M. Lin, C. F. Hsiao, C. H. Lin
Adsorption of many kinds of dyes on unmodified DNA at different pH environment
Zhen-Jia Li, Chi-Peng Chang

Full text 全文

PDF 全文 → Open Access

Issue: Vol. 23 No. 1 (2016)
Section: Original Research Articles
Pages: 18-26
Submitted: 2016-01-19
Published: 2016-01-19
ID: JHGT-16-182
Views: 2
Downloads: 0

引用 How to cite

Yang, P. C., Huang, Y. J., & Hsing, W. H. (2016). Study of Two-stage Dipping Adhesion of Ply Cord. Journal of the Hwa Gang Textile, 23(1), 18-26. https://www.jhgt.org.tw/article/view/168

@article{yang2016_168,
  author  = {Yang, P. C. and Huang, Y. J. and Hsing, W. H.},
  title   = {Study of Two-stage Dipping Adhesion of Ply Cord},
  journal = {Journal of the Hwa Gang Textile},
  year    = {2016},
  volume  = {23},
  number  = {1},
  pages   = {18--26},
  issn    = {1025-9678},
  url     = {https://www.jhgt.org.tw/article/view/168}
}

TY  - JOUR
AU  - Yang, P. C.
AU  - Huang, Y. J.
AU  - Hsing, W. H.
TI  - Study of Two-stage Dipping Adhesion of Ply Cord
JO  - Journal of the Hwa Gang Textile
T2  - 華岡紡織期刊
VL  - 23
IS  - 1
PY  - 2016
SP  - 18
EP  - 26
KW  - High Strength Polyester
KW  - RFL Agents
KW  - Isocyanate Compound
SN  - 1025-9678
UR  - https://www.jhgt.org.tw/article/view/168
AB  - The 3×3 high strength polyester ply cord modified surface by the isocyanate compound, let RFL and that modified surface with great bonding properties. According to temperature of the third and sixth channel in line of factory temperature set of 225 and 230℃, and lowering the temperature, respectively, experiment A lowering third and sixth channel in line to 160 and 205℃, experiment B lowering third and keep sixth channel in line to 160 and 230℃, and with solid ingredient of 22.00, 22.25, 22.50% and load to 1.0 and 1.5 Kg, observed changes of physical properties of the ply cord. Research that, lowering the temperature can promote the physical properties, but the RFL agents coated fiber without complete. Change the solid ingredient can improve RFL agents coated situation, so you can use to increase quantity contained of VP-Latex to improve that reduce temperature to cause RFL agents coated not complete by the phenomenon. It can reduce energy cost and improve physical properties of ply cord.
ER  -

下載 .ris 下載 .bib

分享 Share