Abstract
In this study, used Nylon / PET (70/30) ultra-fine fiber spunbond non-woven fabric for the fabric filament, Impregnated with water-based PU. The pressure absorption, drying, bridges and other steps. By adding different concentrations of water-based PU to investigate the physical properties of fabrics to find the best properties include: stiffness, burst strength and tensile strength and friction. The results showed that when the water-based PU was 20% of the physical properties of the fabric began to have significantly improved. The concentration increased to 40%, the properties have further strengthened.
Keywords摘要
本實驗係以Nylon/PET(70/30)超細纖維紡粘長纖不織布為基布,施以水性PU浸漬處理,經壓吸、烘乾、架橋等步驟,藉由添加不同濃度的水性PU來探討其加工布之物性研究,找出最佳的物性包括:硬挺度、破裂強力和摩擦以及拉伸強度,結果顯示當水性PU濃度為20%時對織物的物性開始有明顯的改善,而濃度提升到40%時,物性又有更進一步的加強。
關鍵字Also in this issue
Full TOC →- Preparation and Sustained Release Properties of Aqueous Polyurethane Microcapsules Containing Essential OilC. S. Lin, M. H. Lin, C. Y. Chen, C. P. Chang
- The Effect of Culture Properties of NaOH Treated Luffa Culture Medium Added Calcium AleinateJ. H. Huang, C. R. Li, C. P. Chang
- The Analysis of Absorbing Electromagnetic Waves used by Swelling Method and Electroless Nickel Plated Way on Polyester FiberK. C. Lee, H. J. Yu, H. J. Chang
- Perspiration Far-Infrared Thickness Fabric Radiation EffectW. J. Yang, W. H. Hsing
- Using Anti-Reflective Coating Technology Processed on the Glass Fiber MembraneT. L. Hsin, W. H. Hsing, Nour Chuang