Preparation, Properties and Spinnability of Viscose Filament for Tea Tree Oil Microcapsules with Polyurethanes as Wall Material

J. P. Wang; X. C. Wang; X. X. Zhang; D. Q. Liu

Home / Archives / Vol. 22 No. 2 (2015) / Original Research Articles

Original Research Articles · 研究論文

Preparation, Properties and Spinnability of Viscose Filament for Tea Tree Oil Microcapsules with Polyurethanes as Wall Material

以聚氨酯為壁材的茶樹油香精微膠囊的製備、性能及粘膠共混可紡性研究

J. P. Wang 王建平 ✉ School of Materials Science and Engineering, Tianjin Polytechnic University, Xinxiang Bailu Chemical Fibre Group Co., Ltd,
X. C. Wang 王學晨 School of Materials Science and Engineering, Tianjin Polytechnic University, Xinxiang Bailu Chemical Fibre Group Co., Ltd,
X. X. Zhang 張興祥 School of Materials Science and Engineering, Tianjin Polytechnic University, Xinxiang Bailu Chemical Fibre Group Co., Ltd,
D. Q. Liu 劉東啟 School of Materials Science and Engineering, Tianjin Polytechnic University, Xinxiang Bailu Chemical Fibre Group Co., Ltd,

Abstract

Polyurethane microcapsules containing tea tree oil (TTO) have been prepared using an interfacial polymerization with toluene diisocyanate (TDI) trimer as reaction monomers, 1,4- butylene glycol as chain extender, and with nonionic surfactant OP-10 and styrene maleic anhydride polymer (SAM) as co-emulsifier. Effect of the spinnability of viscose filament on the solid content of microcapsule has been studied too. Furthermore, the surface morphologies and thermal stabilities of microencapsulated TTO and viscose filament were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermogravimetric analysis (TG), respectively. The results showed that prepared TTO microcapsules have smooth surface, the particle size distribution is about 0.2-3μm when the ratio of core to wall is less than 5/6. The initial decomposition temperature (T0.05) of microcapsules is about 110 °C. When the solid content of added microcapsules to viscose filament is no more than 10 wt%, the viscose filament has good spinnability.

Keywords

摘要

本文探討採用介面聚合的方法，以甲苯-2,4-二異氰酸酯(TDI)為反應單體製備的TDI三聚體為單體，1,4-丁二醇為擴鏈劑，非離子表面活性劑OP-10及苯乙烯-co-馬來酸酐聚合物（SAM）為複配乳化劑，製備了以茶樹油（TTO）為芯材、聚氨酯為壁材的香精微膠囊，並研究了添加香精微膠囊的固含量對粘膠纖維長絲紡絲可紡性的影響。場發射掃描電鏡（SEM）、投射電鏡（TEM）、熱失重分析（TG）等實驗結果表明，以乙酸丁酯為溶劑所製備的TDI三聚體，其芯壁比小於5/6時，所製備的TTO香精微膠囊表面光滑，粒徑分佈範圍為0.2-3 μm，起始失重溫度（T0.05）為110 °C左右，當添加微膠囊的固含量不超過10 wt%時，粘膠纖維長絲具有優良的可紡性。製備的纖維具有濃鬱的茶樹油香味。

關鍵字

Also in this issue

Full TOC →

Effect of laminate structure and thermal treatment on the properties of hybrid laminated compound fabric
R. S. Yan, R. Wang, J. H. Lin
Energy Transfer Mechanism of SrAl2O4: Eu2+, Dy3+ to Light Conversion Agent in the Luminous Fiber
Y N Zhu, M Q Ge
A Study of Uniform Purchasing Specifications for Governmental Organization
Der-torng Feng, Ching-Yi Cheng, Jaw-Hua Chiao
Longitudinal Structure of Kapok Fibers
F. M. Wang, L. X. Hu, G. B. Xu
Effect of Attapulgite Addition on The Properties of Polyacrylonitrile Nanocomposite Hollow Fiber Membranes
H. A. Tsai, J. D. Syu, Y. J. Tso, J. W. Li

Full text 全文

Abstract only

作者未授權開放全文下載。

Issue: Vol. 22 No. 2 (2015)
Section: Original Research Articles
Pages: 96
Submitted: 2015-10-17
Published: 2015-10-17
ID: JHGT-15-141
Views: 2
Downloads: 0

引用 How to cite

Wang, J. P., Wang, X. C., Zhang, X. X., & Liu, D. Q. (2015). Preparation, Properties and Spinnability of Viscose Filament for Tea Tree Oil Microcapsules with Polyurethanes as Wall Material. Journal of the Hwa Gang Textile, 22(2), 96. https://www.jhgt.org.tw/article/view/132

@article{wang2015_132,
  author  = {Wang, J. P. and Wang, X. C. and Zhang, X. X. and Liu, D. Q.},
  title   = {Preparation, Properties and Spinnability of Viscose Filament for Tea Tree Oil Microcapsules with Polyurethanes as Wall Material},
  journal = {Journal of the Hwa Gang Textile},
  year    = {2015},
  volume  = {22},
  number  = {2},
  pages   = {96},
  issn    = {1025-9678},
  url     = {https://www.jhgt.org.tw/article/view/132}
}

TY - JOUR
AU - Wang, J. P.
AU - Wang, X. C.
AU - Zhang, X. X.
AU - Liu, D. Q.
TI - Preparation, Properties and Spinnability of Viscose Filament for Tea Tree Oil Microcapsules with Polyurethanes as Wall Material
JO - Journal of the Hwa Gang Textile
T2 - 華岡紡織期刊
VL - 22
IS - 2
PY - 2015
SP - 96
KW - Microcapsule
KW - polyurethane
KW - tea tree oil
KW - viscose filament
KW - spinnability
SN - 1025-9678
UR - https://www.jhgt.org.tw/article/view/132
AB - Polyurethane microcapsules containing tea tree oil (TTO) have been prepared using an interfacial polymerization with toluene diisocyanate (TDI) trimer as reaction monomers, 1,4- butylene glycol as chain extender, and with nonionic surfactant OP-10 and styrene maleic anhydride polymer (SAM) as co-emulsifier. Effect of the spinnability of viscose filament on the solid content of microcapsule has been studied too. Furthermore, the surface morphologies and thermal stabilities of microencapsulated TTO and viscose filament were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermogravimetric analysis (TG), respectively. The results showed that prepared TTO microcapsules have smooth surface, the particle size distribution is about 0.2-3μm when the ratio of core to wall is less than 5/6. The initial decomposition temperature (T0.05) of microcapsules is about 110 °C. When the solid content of added microcapsules to viscose filament is no more than 10 wt%, the viscose filament has good spinnability.
ER -

下載 .ris 下載 .bib

分享 Share